How to choose food grade packaging bag material? Complete analysis of PET, NY, PE, CPP and food safety regulations
How to choose food grade packaging bag material? Complete analysis of PET, NY, PE, CPP and food safety regulations
When selecting food packaging bags, a single material often cannot meet the requirements of moisture resistance, oxygen isolation, heat resistance and freezing resistance at the same time. Therefore, most food bags on the market are made of composite materials laminated. This article sorts out the characteristics of common food-grade bag materials such as PET, NY, PE, and CPP, and organizes food contact hygiene standards and material selection processes to help you understand how to choose safe and high-quality food packaging.
Article directory
- Core principles for food bag material selection
- Comparison table of common food packaging bag material properties
- Four-step process of food bag customization and material selection
- Frequently Asked Questions about Choosing Food Grade Packaging Bags
Core principles for food bag material selection
For food packaging that comes into direct contact with ingredients, the first requirement is to comply with the hygiene standards of the Food and Drug Administration (TFDA) of the Ministry of Health and Welfare and the international SGS food container hygiene standards. In addition, whether the product is dry goods, sauces, high-oil foods or frozen fresh food determines what kind of "barrier property" the packaging bag requires.
Composite packaging bags are usually composed of 2 to 4 layers of materials:
Outer layer (printing layer): commonly used PET or OPP, with good texture and clear printing.
Middle layer (barrier layer): commonly used NY (nylon, puncture-resistant) or AL (aluminum foil, completely light-proof and oxygen-proof).
Inner layer (heat sealing layer): commonly used PE or CPP, directly in contact with food, responsible for sealing and fitting.
Comparison table of common food packaging bag material properties
- PET (polyester) has high transparency, good rigidity, and good gas barrier ability. -40℃ ~ 120℃. Dry goods, outer layer of biscuits, and tea leaves. Suitable for outer layer printing to enhance the visual quality of the product.
- NY (nylon) is strong and puncture-resistant, resistant to drops and impacts, and has strong gas barrier properties -40℃ ~ 100℃. Dried meat, dumplings, frozen seafood, bone-in food. Essential for bone or hard-shell products to avoid bag breakage during transportation.
- PE (polyethylene) is non-toxic and tasteless, has good toughness, and is impact-resistant at low temperatures -40℃ ~ 80℃. The inner layer of frozen food, powder, and general dry goods is the most common inner layer heat-sealing material and has excellent frozen storage performance.
- CPP (non-oriented polypropylene) has high heat resistance, high gloss, and good oil resistance 0℃ ~ 120℃. Delicatessen, high-oil sauces, and microwave heating packaging. For products that require microwave or high-temperature filling, CPP is the first choice for the inner layer.
Four-step process of food bag customization and material selection
Step 1: Determine product characteristics ➔ Assess moisture content, oil content, shelf life and temperature requirements
Step 2: Select composite materials ➔ Match the number of layers (such as PET/NY/PE) according to moisture-proof, oxygen-proof, and puncture-resistant requirements
Step 3: Sample sleeve sampling and penetration test ➔ Carry out sealing test, leakage test and actual filling evaluation
Step 4: Mass production and quality inspection ➔ Use high-precision printing and fine trimming for fast delivery
Frequently Asked Questions about Choosing Food Grade Packaging Bags
Q1: What is a food-grade packaging bag? How is it different from ordinary plastic bags?
Food-grade packaging bags must be produced from new virgin plastic raw materials, and second-hand recycled materials must not be added. The raw materials and ink must meet the hygienic standards for packaging of food utensils and containers to ensure that heavy metals or plasticizers will not dissolve under high temperatures or long-term contact.
Q2: What will happen if the wrong packaging bag is used for sauces or high-fat foods?
If an inner material that is not oil-resistant or has poor heat-sealability is used (such as ordinary thin PE), grease may penetrate the material, causing degumming and oil leakage at the seal, and even causing the printing on the packaging surface to swell and deform. It is recommended to use CPP or high-density PE with good oil resistance.
Q3: How to test whether the seal of customized food bags is firm?
When Hi-Lai Plastic provides manual proofing, it will assist customers in conducting "penetration testing" and "load-bearing testing", using air-tight pressure testing and tensile testing to ensure that the seal will not break during transportation and extrusion.